ProductsManufacturersSolutionsKnowledgeIndustry NewsResourcesAbout
Back to Products
Special Glue for Corrugated Board

Packaging Adhesives

Special Glue for Corrugated Board

Supplier: Anhui Xuegong

For domestic and imported automatic board lines and single-facers producing 3-, 5-, 7-, and 9-ply board. Replaces pure starch or starch-plus-additive systems. ECT gain over 10%, gel point ~5–6°C lower, dosage about 80% of ordinary pure starch glue.

Product Overview

Xuegong special glue for corrugated board (corrugator-line special adhesive) is used on domestic and imported automatic paperboard lines and single-facers to produce 3-, 5-, 7-, and 9-ply board, replacing pure starch glue and starch with various additives.

Hard film: after reinforcement treatment, film hardness is high; flat crush and edge crush of bonded board improve clearly. Edge crush rises by more than 10%, fully reaching or exceeding starch-plus-additive adhesives.

Excellent moisture resistance: after moisture-resistant treatment, film moisture resistance is clearly higher than pure starch and close to starch with water-resistant additives, more reliably meeting carton moisture needs in humid environments.

Low gelatinization point: gel point is about 5–6°C lower than common starch. At the same steam pressure and temperature, start-up speed can rise clearly while bonding stays firm.

Strong bonding: firm adhesion means lower dosage — only about 80% of ordinary pure starch glue. Clearly raises board strength and start-up speed, improves moisture resistance, and saves cost.

Features

For automatic corrugators and single-facers
For 3-, 5-, 7-, and 9-ply board
Hard film; ECT gain over 10%
Moisture resistance close to water-resistant additive systems
Gel point ~5–6°C lower; supports higher speed
Dosage about 80% of ordinary pure starch glue
Replaces pure starch and starch-plus-additive glues

Specifications

Appearance

White or slightly yellowish powder

Odor

No abnormal odor

Fineness (80 mesh)

≥95.0%

Bond Strength (room temp)

≥5.88×10² N/m

pH

7±2

Moisture

≤14%

ECT Gain

Over 10%

Gel Point

~5–6°C lower than common starch

Dosage

About 80% of ordinary pure starch glue

Packaging

25 kg bags

Applications

Corrugators, single-facers; 3–9 ply board